THK_DI

THK DIK 5016-4

Lead Ph Basic load rating Permissible load F P Nut mass Shaft mass Dynamic rating Ca Static rating C 0 a mm kN kN kN kg kg/m 16 32.3 75.5 3.52 13.41 Type using standard material Standard grease Standard seal Iron-based AFB-LF RR Dimensions of the Ball Screw Nut Attached with Wiper Ring W and QZ Lubricator WW avail- ability QZ avail- ability Dimensions including WW L Length of protrusion with QZ attached QWL Outer diameer of protru- sion with QZ a...更多信息

THK DIK 4012-8

Lead Ph Basic load rating Permissible load F P Nut mass Shaft mass Dynamic rating Ca Static rating C 0 a mm kN kN kN kg kg/m 12 39.2 96.4 2.78 8.5 Type using standard material Standard grease Standard seal Iron-based AFB-LF RR Dimensions of the Ball Screw Nut Attached with Wiper Ring W and QZ Lubricator WW avail- ability QZ avail- ability Dimensions including WW L Length of protrusion with QZ attached QWL Outer diameer of protru- sion with QZ att...更多信息

THK DIR 4012-6

Lead Ph Basic load rating Permissible load F P Nut mass Shaft mass Dynamic rating Ca Static rating C 0 a mm kN kN kN kg kg/m 12 30.6 72.3 3.9 8.5 Type using standard material Standard grease Standard seal Iron-based AFB-LF RR...更多信息

THK DIK 2008-4

Lead Ph Basic load rating Permissible load F P Nut mass Shaft mass Dynamic rating Ca Static rating C 0 a mm kN kN kN kg kg/m 8 8.1 14.4 0.45 2.06 Type using standard material Standard grease Standard seal Iron-based AFB-LF RR Dimensions of the Ball Screw Nut Attached with Wiper Ring W and QZ Lubricator WW avail- ability QZ avail- ability Dimensions including WW L Length of protrusion with QZ attached QWL Outer diameer of protru- sion with QZ atta...更多信息

THK DIK 6312-6

Lead Ph Basic load rating Permissible load F P Nut mass Shaft mass Dynamic rating Ca Static rating C 0 a mm kN kN kN kg kg/m 12 51.9 147.4 4.93 21.14 Type using standard material Standard grease Standard seal Iron-based AFB-LF RR Dimensions of the Ball Screw Nut Attached with Wiper Ring W and QZ Lubricator WW avail- ability QZ avail- ability Dimensions including WW L Length of protrusion with QZ attached QWL Outer diameer of protru- sion with QZ...更多信息

THK DIK 2806-6

Lead Ph Basic load rating Permissible load F P Nut mass Shaft mass Dynamic rating Ca Static rating C 0 a mm kN kN kN kg kg/m 6 14 32 0.64 4.36 Type using standard material Standard grease Standard seal Iron-based AFB-LF RR Dimensions of the Ball Screw Nut Attached with Wiper Ring W and QZ Lubricator WW avail- ability QZ avail- ability Dimensions including WW L Length of protrusion with QZ attached QWL Outer diameer of protru- sion with QZ attache...更多信息

THK DIK 3206-6

Lead Ph Basic load rating Permissible load F P Nut mass Shaft mass Dynamic rating Ca Static rating C 0 a mm kN kN kN kg kg/m 6 14.9 37.1 0.74 6.31 Type using standard material Standard grease Standard seal Iron-based AFB-LF RR Dimensions of the Ball Screw Nut Attached with Wiper Ring W and QZ Lubricator WW avail- ability QZ avail- ability Dimensions including WW L Length of protrusion with QZ attached QWL Outer diameer of protru- sion with QZ att...更多信息

THK DIK 2810-4

Lead Ph Basic load rating Permissible load F P Nut mass Shaft mass Dynamic rating Ca Static rating C 0 a mm kN kN kN kg kg/m 10 12.3 25 0.82 4.18 Type using standard material Standard grease Standard seal Iron-based AFB-LF RR Dimensions of the Ball Screw Nut Attached with Wiper Ring W and QZ Lubricator WW avail- ability QZ avail- ability Dimensions including WW L Length of protrusion with QZ attached QWL Outer diameer of protru- sion with QZ atta...更多信息

THK DIK 2005-6

Lead Ph Basic load rating Permissible load F P Nut mass Shaft mass Dynamic rating Ca Static rating C 0 a mm kN kN kN kg kg/m 5 8.5 17.3 0.38 2.06 Type using standard material Standard grease Standard seal Iron-based AFB-LF RR Dimensions of the Ball Screw Nut Attached with Wiper Ring W and QZ Lubricator WW avail- ability QZ avail- ability Dimensions including WW L Length of protrusion with QZ attached QWL Outer diameer of protru- sion with QZ atta...更多信息

THK DIK 3205-8

Lead Ph Basic load rating Permissible load F P Nut mass Shaft mass Dynamic rating Ca Static rating C 0 a mm kN kN kN kg kg/m 5 14.2 40.3 0.67 5.67 Type using standard material Standard grease Standard seal Iron-based AFB-LF RR Dimensions of the Ball Screw Nut Attached with Wiper Ring W and QZ Lubricator WW avail- ability QZ avail- ability Dimensions including WW L Length of protrusion with QZ attached QWL Outer diameer of protru- sion with QZ att...更多信息

THK DIK 4012-6

Lead Ph Basic load rating Permissible load F P Nut mass Shaft mass Dynamic rating Ca Static rating C 0 a mm kN kN kN kg kg/m 12 30.6 72.3 2.44 8.5 Type using standard material Standard grease Standard seal Iron-based AFB-LF RR Dimensions of the Ball Screw Nut Attached with Wiper Ring W and QZ Lubricator WW avail- ability QZ avail- ability Dimensions including WW L Length of protrusion with QZ attached QWL Outer diameer of protru- sion with QZ att...更多信息

THK DIK 6312-8

Lead Ph Basic load rating Permissible load F P Nut mass Shaft mass Dynamic rating Ca Static rating C 0 a mm kN kN kN kg kg/m 12 66.4 196.6 5.56 21.14 Type using standard material Standard grease Standard seal Iron-based AFB-LF RR Dimensions of the Ball Screw Nut Attached with Wiper Ring W and QZ Lubricator WW avail- ability QZ avail- ability Dimensions including WW L Length of protrusion with QZ attached QWL Outer diameer of protru- sion with QZ...更多信息

THK DIK 4010-6

Lead Ph Basic load rating Permissible load F P Nut mass Shaft mass Dynamic rating Ca Static rating C 0 a mm kN kN kN kg kg/m 10 29.8 69.3 2.09 8.22 Type using standard material Standard grease Standard seal Iron-based AFB-LF RR Dimensions of the Ball Screw Nut Attached with Wiper Ring W and QZ Lubricator WW avail- ability QZ avail- ability Dimensions including WW L Length of protrusion with QZ attached QWL Outer diameer of protru- sion with QZ at...更多信息

THK DIR 2005-6

Lead Ph Basic load rating Permissible load F P Nut mass Shaft mass Dynamic rating Ca Static rating C 0 a mm kN kN kN kg kg/m 5 8.5 17.3 0.68 2.05 Type using standard material Standard grease Standard seal Iron-based AFB-LF RR...更多信息

THK DIK 2505-6

载荷钢球圈列数 DN值预压预压方法预压负荷（N） 3列 1.00圈 70000 有定位置预压 485 导轨型号丝杠轴加工方式球保持器轴的花键部分中空轴滚珠精密无无无轴承支撑座固定侧的推荐方式轴承支撑座支撑侧的推荐方式螺母种类螺纹方向间隔钢球 BK15,BK17,BK20,EK15,EK20,FK15,FK20 BF15, BF17, BF20, EF15, EF20, FF15, FF20 简易螺帽右螺纹无轴方向刚性（...更多信息

THK DIK 3204-10

载荷钢球圈列数 DN值预压预压方法预压负荷（N） 5列 1.00圈 70000 有定位置预压 500 导轨型号丝杠轴加工方式球保持器轴的花键部分中空轴滚珠精密无无无轴承支撑座固定侧的推荐方式轴承支撑座支撑侧的推荐方式螺母种类螺纹方向间隔钢球 BK20,EK20,FK20 BF20, EF20, FF20 简易螺帽右螺纹无轴方向刚性（N/μm）螺纹条数防尘措施防尘罩...更多信息

THK DIK 5010-8

载荷钢球圈列数 DN值预压预压方法预压负荷（N） 4列 1.00圈 70000 有定位置预压 2170 导轨型号丝杠轴加工方式球保持器轴的花键部分中空轴滚珠精密无无无轴承支撑座固定侧的推荐方式轴承支撑座支撑侧的推荐方式螺母种类螺纹方向间隔钢球 BK40 BF40 简易螺帽右螺纹无轴方向刚性（N/μm）螺纹条数防尘措施防尘罩形式 W清洁环...更多信息

THK DIK 2506-6

载荷钢球圈列数 DN值预压预压方法预压负荷（N） 3列 1.00圈 70000 有定位置预压 640 导轨型号丝杠轴加工方式球保持器轴的花键部分中空轴滚珠精密无无无轴承支撑座固定侧的推荐方式轴承支撑座支撑侧的推荐方式螺母种类螺纹方向间隔钢球 BK15,BK17,BK20,EK15,EK20,FK15,FK20 BF15, BF17, BF20, EF15, EF20, FF15, FF20 简易螺帽右螺纹无轴方向刚性（...更多信息

THK DIK 2810-4

载荷钢球圈列数 DN值预压预压方法预压负荷（N） 2列 1.00圈 70000 有定位置预压 615 导轨型号丝杠轴加工方式球保持器轴的花键部分中空轴滚珠精密无无无轴承支撑座固定侧的推荐方式轴承支撑座支撑侧的推荐方式螺母种类螺纹方向间隔钢球 BK20,EK20,FK20 BF20, EF20, FF20 简易螺帽右螺纹无轴方向刚性（N/μm）螺纹条数防尘措施防尘罩...更多信息

THK DIK 1605-6

载荷钢球圈列数 DN值预压预压方法预压负荷（N） 3列 1.00圈 70000 有定位置预压 370 导轨型号丝杠轴加工方式球保持器轴的花键部分中空轴滚珠精密无无无轴承支撑座固定侧的推荐方式轴承支撑座支撑侧的推荐方式螺母种类螺纹方向间隔钢球 BK12,EK12,FK12 BF12, EF12, FF12 简易螺帽右螺纹无轴方向刚性（N/μm）螺纹条数防尘措施防尘罩...更多信息

THK DIR 3205-6

载荷钢球圈列数 DN值预压预压方法预压负荷（N） 3列 1.00圈 70000 有定位置预压 555 导轨型号丝杠轴加工方式球保持器轴的花键部分中空轴滚珠精密无无无轴承支撑座固定侧的推荐方式轴承支撑座支撑侧的推荐方式螺母种类螺纹方向间隔钢球无无简易螺帽右螺纹无轴方向刚性（N/μm）螺纹条数防尘措施支撑部轴承防尘措施防...更多信息

THK DIK 4012-8

载荷钢球圈列数 DN值预压预压方法预压负荷（N） 4列 1.00圈 70000 有定位置预压 1960 导轨型号丝杠轴加工方式球保持器轴的花键部分中空轴滚珠精密无无无轴承支撑座固定侧的推荐方式轴承支撑座支撑侧的推荐方式螺母种类螺纹方向间隔钢球 BK30,FK30 BF30, FF30 简易螺帽右螺纹无轴方向刚性（N/μm）螺纹条数防尘措施防尘罩形式...更多信息

THK DIK 5016-6

载荷钢球圈列数 DN值预压预压方法预压负荷（N） 3列 1.00圈 70000 有定位置预压 2285 导轨型号丝杠轴加工方式球保持器轴的花键部分中空轴滚珠精密无无无轴承支撑座固定侧的推荐方式轴承支撑座支撑侧的推荐方式螺母种类螺纹方向间隔钢球 BK40 BF40 简易螺帽右螺纹无轴方向刚性（N/μm）螺纹条数防尘措施防尘罩形式 W清洁环...更多信息

THK DIK 2506-4

载荷钢球圈列数 DN值预压预压方法预压负荷（N） 2列 1.00圈 70000 有定位置预压 455 导轨型号丝杠轴加工方式球保持器轴的花键部分中空轴滚珠精密无无无轴承支撑座固定侧的推荐方式轴承支撑座支撑侧的推荐方式螺母种类螺纹方向间隔钢球 BK15,BK17,BK20,EK15,EK20,FK15,FK20 BF15, BF17, BF20, EF15, EF20, FF15, FF20 简易螺帽右螺纹无轴方向刚性（...更多信息

THK DIK 2508-6

载荷钢球圈列数 DN值预压预压方法预压负荷（N） 3列 1.00圈 70000 有定位置预压 655 导轨型号丝杠轴加工方式球保持器轴的花键部分中空轴滚珠精密无无无轴承支撑座固定侧的推荐方式轴承支撑座支撑侧的推荐方式螺母种类螺纹方向间隔钢球 BK15,BK17,BK20,EK15,EK20,FK15,FK20 BF15, BF17, BF20, EF15, EF20, FF15, FF20 简易螺帽右螺纹无轴方向刚性（...更多信息

THK DIK 3204-8

载荷钢球圈列数 DN值预压预压方法预压负荷（N） 4列 1.00圈 70000 有定位置预压 410 导轨型号丝杠轴加工方式球保持器轴的花键部分中空轴滚珠精密无无无轴承支撑座固定侧的推荐方式轴承支撑座支撑侧的推荐方式螺母种类螺纹方向间隔钢球 BK20,EK20,FK20 BF20, EF20, FF20 简易螺帽右螺纹无轴方向刚性（N/μm）螺纹条数防尘措施防尘罩...更多信息

THK DIK 2508-4

载荷钢球圈列数 DN值预压预压方法预压负荷（N） 2列 1.00圈 70000 有定位置预压 460 导轨型号丝杠轴加工方式球保持器轴的花键部分中空轴滚珠精密无无无轴承支撑座固定侧的推荐方式轴承支撑座支撑侧的推荐方式螺母种类螺纹方向间隔钢球 BK15,BK17,BK20,EK15,EK20,FK15,FK20 BF15, BF17, BF20, EF15, EF20, FF15, FF20 简易螺帽右螺纹无轴方向刚性（...更多信息

THK DIK 5016-4

载荷钢球圈列数 DN值预压预压方法预压负荷（N） 2列 1.00圈 70000 有定位置预压 1615 导轨型号丝杠轴加工方式球保持器轴的花键部分中空轴滚珠精密无无无轴承支撑座固定侧的推荐方式轴承支撑座支撑侧的推荐方式螺母种类螺纹方向间隔钢球 BK40 BF40 简易螺帽右螺纹无轴方向刚性（N/μm）螺纹条数防尘措施防尘罩形式 W清洁环...更多信息

THK DIK 3610-8

载荷钢球圈列数 DN值预压预压方法预压负荷（N） 4列 1.00圈 70000 有定位置预压 1840 导轨型号丝杠轴加工方式球保持器轴的花键部分中空轴滚珠精密无无无轴承支撑座固定侧的推荐方式轴承支撑座支撑侧的推荐方式螺母种类螺纹方向间隔钢球 BK25,FK25 BF25, FF25 简易螺帽右螺纹无轴方向刚性（N/μm）螺纹条数防尘措施防尘罩形式...更多信息

THK DIK 3212-4

Number of loaded circuits DN Value Preload Method for Providing a Preload Applied preload(N) 2 row 1.00 turns 70000 Yes fixed point preload 940 Type of guide Shaft process method Ball cage Splined portion Hollow shaft Ball Precision None None None Recommended support unit on the Fixed Side type Recommended support unit on the Supported Side type Types of Nuts Threading direction Spacer ball BK20,EK20,FK20 BF20, EF20, FF20 Simple Nut Right-hand No...更多信息

THK DIK 1404-4

Number of loaded circuits DN Value Preload Method for Providing a Preload Applied preload(N) 2 row 1.00 turns 70000 Yes fixed point preload 150 Type of guide Shaft process method Ball cage Splined portion Hollow shaft Ball Precision None None None Recommended support unit on the Fixed Side type Recommended support unit on the Supported Side type Types of Nuts Threading direction Spacer ball BK10,BK12,EK10,EK12,FK10,FK12 BF10, BF12, EF10, EF12, FF...更多信息

THK DIK 3205-8

Number of loaded circuits DN Value Preload Method for Providing a Preload Applied preload(N) 4 rows 1.00 turns 70000 Yes fixed point preload 710 Type of guide Shaft process method Ball cage Splined portion Hollow shaft Ball Precision None None None Recommended support unit on the Fixed Side type Recommended support unit on the Supported Side type Types of Nuts Threading direction Spacer ball BK20,EK20,FK20 BF20, EF20, FF20 Simple Nut Right-hand N...更多信息

THK DIK 3204-6

Number of loaded circuits DN Value Preload Method for Providing a Preload Applied preload(N) 3 row 1.00 turns 70000 Yes fixed point preload 320 Type of guide Shaft process method Ball cage Splined portion Hollow shaft Ball Precision None None None Recommended support unit on the Fixed Side type Recommended support unit on the Supported Side type Types of Nuts Threading direction Spacer ball BK20,EK20,FK20 BF20, EF20, FF20 Simple Nut Right-hand No...更多信息

THK DIK 2506-4

Number of loaded circuits DN Value Preload Method for Providing a Preload Applied preload(N) 2 row 1.00 turns 70000 Yes fixed point preload 455 Type of guide Shaft process method Ball cage Splined portion Hollow shaft Ball Precision None None None Recommended support unit on the Fixed Side type Recommended support unit on the Supported Side type Types of Nuts Threading direction Spacer ball BK15,BK17,BK20,EK15,EK20,FK15,FK20 BF15, BF17, BF20, EF1...更多信息

THK DIK 2004-6

Number of loaded circuits DN Value Preload Method for Providing a Preload Applied preload(N) 3 row 1.00 turns 70000 Yes fixed point preload 260 Type of guide Shaft process method Ball cage Splined portion Hollow shaft Ball Precision None None None Recommended support unit on the Fixed Side type Recommended support unit on the Supported Side type Types of Nuts Threading direction Spacer ball BK15,BK17,EK15,FK15 BF15, BF17, EF15, FF15 Simple Nut Ri...更多信息

THK DIR 4012-6

Number of loaded circuits DN Value Preload Method for Providing a Preload Applied preload(N) 3 row 1.00 turns 70000 Yes fixed point preload 1530 Type of guide Shaft process method Ball cage Splined portion Hollow shaft Ball Precision None None None Recommended support unit on the Fixed Side type Recommended support unit on the Supported Side type Types of Nuts Threading direction Spacer ball None None Simple Nut Right-hand None Rigidity in the ax...更多信息

THK DIR 1605-6

Number of loaded circuits DN Value Preload Method for Providing a Preload Applied preload(N) 3 row 1.00 turns 70000 Yes fixed point preload 370 Type of guide Shaft process method Ball cage Splined portion Hollow shaft Ball Precision None None None Recommended support unit on the Fixed Side type Recommended support unit on the Supported Side type Types of Nuts Threading direction Spacer ball None None Simple Nut Right-hand None Rigidity in the axi...更多信息

THK DIK 2006-6

Number of loaded circuits DN Value Preload Method for Providing a Preload Applied preload(N) 3 row 1.00 turns 70000 Yes fixed point preload 570 Type of guide Shaft process method Ball cage Splined portion Hollow shaft Ball Precision None None None Recommended support unit on the Fixed Side type Recommended support unit on the Supported Side type Types of Nuts Threading direction Spacer ball BK15,BK17,EK15,FK15 BF15, BF17, EF15, FF15 Simple Nut Ri...更多信息

THK DIK 3204-8

Number of loaded circuits DN Value Preload Method for Providing a Preload Applied preload(N) 4 rows 1.00 turns 70000 Yes fixed point preload 410 Type of guide Shaft process method Ball cage Splined portion Hollow shaft Ball Precision None None None Recommended support unit on the Fixed Side type Recommended support unit on the Supported Side type Types of Nuts Threading direction Spacer ball BK20,EK20,FK20 BF20, EF20, FF20 Simple Nut Right-hand N...更多信息

THK DIK 3204-10

Number of loaded circuits DN Value Preload Method for Providing a Preload Applied preload(N) 5 rows 1.00 turns 70000 Yes fixed point preload 500 Type of guide Shaft process method Ball cage Splined portion Hollow shaft Ball Precision None None None Recommended support unit on the Fixed Side type Recommended support unit on the Supported Side type Types of Nuts Threading direction Spacer ball BK20,EK20,FK20 BF20, EF20, FF20 Simple Nut Right-hand N...更多信息

THK_DI

THK_DI

Background to development