THK_BNFN_5

THK BNFN 5010-7.5

Lead Ph Basic load rating Permissible load F P Nut mass Shaft mass Dynamic rating Ca Static rating C 0 a mm kN kN kN kg kg/m 10 82.5 264.6 9.19 13.38 Type using standard material Standard grease Standard seal Iron-based AFB-LF None Dimensions of the Ball Screw Nut Attached with Wiper Ring W and QZ Lubricator WW avail- ability QZ avail- ability Dimensions including WW L Length of protrusion with QZ attached QWL Outer diameer of protru- sion with Q...更多信息

THK BNFN 5008-7.5

Lead Ph Basic load rating Permissible load F P Nut mass Shaft mass Dynamic rating Ca Static rating C 0 a mm kN kN kN kg kg/m 8 55.4 198.9 6.35 14.0 Type using standard material Standard grease Standard seal Iron-based AFB-LF None Dimensions of the Ball Screw Nut Attached with Wiper Ring W and QZ Lubricator WW avail- ability QZ avail- ability Dimensions including WW L Length of protrusion with QZ attached QWL Outer diameer of protru- sion with QZ...更多信息

THK BNFN 5510-7.5

Lead Ph Basic load rating Permissible load F P Nut mass Shaft mass Dynamic rating Ca Static rating C 0 a mm kN kN kN kg kg/m 10 85.9 291.1 11.23 16.43 Type using standard material Standard grease Standard seal Iron-based AFB-LF None Dimensions of the Ball Screw Nut Attached with Wiper Ring W and QZ Lubricator WW avail- ability QZ avail- ability Dimensions including WW L Length of protrusion with QZ attached QWL Outer diameer of protru- sion with...更多信息

THK BNFN 5010-3

Lead Ph Basic load rating Permissible load F P Nut mass Shaft mass Dynamic rating Ca Static rating C 0 a mm kN kN kN kg kg/m 10 37.5 105.8 6.49 13.38 Type using standard material Standard grease Standard seal Iron-based AFB-LF None Dimensions of the Ball Screw Nut Attached with Wiper Ring W and QZ Lubricator WW avail- ability QZ avail- ability Dimensions including WW L Length of protrusion with QZ attached QWL Outer diameer of protru- sion with Q...更多信息

THK BNFN 5012-5

Lead Ph Basic load rating Permissible load F P Nut mass Shaft mass Dynamic rating Ca Static rating C 0 a mm kN kN kN kg kg/m 12 78.8 220.5 10.63 12.74 Type using standard material Standard grease Standard seal Iron-based AFB-LF None Dimensions of the Ball Screw Nut Attached with Wiper Ring W and QZ Lubricator WW avail- ability QZ avail- ability Dimensions including WW L Length of protrusion with QZ attached QWL Outer diameer of protru- sion with...更多信息

THK BNFN 5512-3.5

Lead Ph Basic load rating Permissible load F P Nut mass Shaft mass Dynamic rating Ca Static rating C 0 a mm kN kN kN kg kg/m 12 52.4 152.9 9.09 16.29 Type using standard material Standard grease Standard seal Iron-based AFB-LF None Dimensions of the Ball Screw Nut Attached with Wiper Ring W and QZ Lubricator WW avail- ability QZ avail- ability Dimensions including WW L Length of protrusion with QZ attached QWL Outer diameer of protru- sion with Q...更多信息

THK BNFN 5010-5

Lead Ph Basic load rating Permissible load F P Nut mass Shaft mass Dynamic rating Ca Static rating C 0 a mm kN kN kN kg kg/m 10 58.2 176.4 7.24 13.38 Type using standard material Standard grease Standard seal Iron-based AFB-LF None Dimensions of the Ball Screw Nut Attached with Wiper Ring W and QZ Lubricator WW avail- ability QZ avail- ability Dimensions including WW L Length of protrusion with QZ attached QWL Outer diameer of protru- sion with Q...更多信息

THK BNFN 5512-3

Lead Ph Basic load rating Permissible load F P Nut mass Shaft mass Dynamic rating Ca Static rating C 0 a mm kN kN kN kg kg/m 12 46 131.3 9.17 16.29 Type using standard material Standard grease Standard seal Iron-based AFB-LF None Dimensions of the Ball Screw Nut Attached with Wiper Ring W and QZ Lubricator WW avail- ability QZ avail- ability Dimensions including WW L Length of protrusion with QZ attached QWL Outer diameer of protru- sion with QZ...更多信息

THK BNFN 5516-5

Lead Ph Basic load rating Permissible load F P Nut mass Shaft mass Dynamic rating Ca Static rating C 0 a mm kN kN kN kg kg/m 16 138.2 402.8 15.94 15.46 Type using standard material Standard grease Standard seal Iron-based AFB-LF None Dimensions of the Ball Screw Nut Attached with Wiper Ring W and QZ Lubricator WW avail- ability QZ avail- ability Dimensions including WW L Length of protrusion with QZ attached QWL Outer diameer of protru- sion with...更多信息

THK BNFN 5020-2.5

Lead Ph Basic load rating Permissible load F P Nut mass Shaft mass Dynamic rating Ca Static rating C 0 a mm kN kN kN kg kg/m 20 72.5 183.3 12.9 13.1 Type using standard material Standard grease Standard seal Iron-based AFB-LF None Dimensions of the Ball Screw Nut Attached with Wiper Ring W and QZ Lubricator WW avail- ability QZ avail- ability Dimensions including WW L Length of protrusion with QZ attached QWL Outer diameer of protru- sion with QZ...更多信息

THK BNFN 5520-5

Lead Ph Basic load rating Permissible load F P Nut mass Shaft mass Dynamic rating Ca Static rating C 0 a mm kN kN kN kg kg/m 20 138.2 403.8 19.61 16.1 Type using standard material Standard grease Standard seal Iron-based AFB-LF None Dimensions of the Ball Screw Nut Attached with Wiper Ring W and QZ Lubricator WW avail- ability QZ avail- ability Dimensions including WW L Length of protrusion with QZ attached QWL Outer diameer of protru- sion with...更多信息

THK BNFN 5005-4.5

Lead Ph Basic load rating Permissible load F P Nut mass Shaft mass Dynamic rating Ca Static rating C 0 a mm kN kN kN kg kg/m 5 20.2 79.5 3.12 14.42 Type using standard material Standard grease Standard seal Iron-based AFB-LF None Dimensions of the Ball Screw Nut Attached with Wiper Ring W and QZ Lubricator WW avail- ability QZ avail- ability Dimensions including WW L Length of protrusion with QZ attached QWL Outer diameer of protru- sion with QZ...更多信息

THK BNFN 5008-5

Lead Ph Basic load rating Permissible load F P Nut mass Shaft mass Dynamic rating Ca Static rating C 0 a mm kN kN kN kg kg/m 8 39.1 132.3 5.08 14.0 Type using standard material Standard grease Standard seal Iron-based AFB-LF None Dimensions of the Ball Screw Nut Attached with Wiper Ring W and QZ Lubricator WW avail- ability QZ avail- ability Dimensions including WW L Length of protrusion with QZ attached QWL Outer diameer of protru- sion with QZ...更多信息

THK BNFN 5016-2.5

Lead Ph Basic load rating Permissible load F P Nut mass Shaft mass Dynamic rating Ca Static rating C 0 a mm kN kN kN kg kg/m 16 72.6 183.3 10.64 12.5 Type using standard material Standard grease Standard seal Iron-based AFB-LF None Dimensions of the Ball Screw Nut Attached with Wiper Ring W and QZ Lubricator WW avail- ability QZ avail- ability Dimensions including WW L Length of protrusion with QZ attached QWL Outer diameer of protru- sion with Q...更多信息

THK BNFN 5012-3.5

Lead Ph Basic load rating Permissible load F P Nut mass Shaft mass Dynamic rating Ca Static rating C 0 a mm kN kN kN kg kg/m 12 58 153.9 8.71 12.74 Type using standard material Standard grease Standard seal Iron-based AFB-LF None Dimensions of the Ball Screw Nut Attached with Wiper Ring W and QZ Lubricator WW avail- ability QZ avail- ability Dimensions including WW L Length of protrusion with QZ attached QWL Outer diameer of protru- sion with QZ...更多信息

THK BNFN 5010-2.5

Lead Ph Basic load rating Permissible load F P Nut mass Shaft mass Dynamic rating Ca Static rating C 0 a mm kN kN kN kg kg/m 10 32 88.2 5.28 13.38 Type using standard material Standard grease Standard seal Iron-based AFB-LF None Dimensions of the Ball Screw Nut Attached with Wiper Ring W and QZ Lubricator WW avail- ability QZ avail- ability Dimensions including WW L Length of protrusion with QZ attached QWL Outer diameer of protru- sion with QZ a...更多信息

THK BNFN 5516-2.5

载荷钢球圈列数 DN值预压预压方法预压负荷（N） 1row 2.50圈 70000 有定位置预压 3805 导轨型号丝杠轴加工方式球保持器轴的花键部分中空轴滚珠精密无无无轴承支撑座固定侧的推荐方式轴承支撑座支撑侧的推荐方式螺母种类螺纹方向间隔钢球 BK40 BF40 双螺帽右螺纹, 左螺纹（需要确认）, 左右螺纹（需要确认）无轴方向刚性（N/μ...更多信息

THK BNFN 5008-2.5

载荷钢球圈列数 DN值预压预压方法预压负荷（N） 1row 2.50圈 70000 有定位置预压 1080 导轨型号丝杠轴加工方式球保持器轴的花键部分中空轴滚珠精密无无无轴承支撑座固定侧的推荐方式轴承支撑座支撑侧的推荐方式螺母种类螺纹方向间隔钢球 BK40 BF40 双螺帽右螺纹, 左螺纹（需要确认）, 左右螺纹（需要确认）无轴方向刚性（N/μ...更多信息

THK BNFN 5520-5

载荷钢球圈列数 DN值预压预压方法预压负荷（N） 2列 2.50圈 70000 有定位置预压 6910 导轨型号丝杠轴加工方式球保持器轴的花键部分中空轴滚珠精密无无无轴承支撑座固定侧的推荐方式轴承支撑座支撑侧的推荐方式螺母种类螺纹方向间隔钢球 BK40 BF40 双螺帽右螺纹, 左螺纹（需要确认）, 左右螺纹（需要确认）无轴方向刚性（N/μ...更多信息

THK BNFN 5010-3.5

载荷钢球圈列数 DN值预压预压方法预压负荷（N） 1row 3.50圈 70000 有定位置预压 2140 导轨型号丝杠轴加工方式球保持器轴的花键部分中空轴滚珠精密无无无轴承支撑座固定侧的推荐方式轴承支撑座支撑侧的推荐方式螺母种类螺纹方向间隔钢球 BK40 BF40 双螺帽右螺纹, 左螺纹（需要确认）, 左右螺纹（需要确认）无轴方向刚性（N/μ...更多信息

THK BNFN 5012-5

载荷钢球圈列数 DN值预压预压方法预压负荷（N） 2列 2.50圈 70000 有定位置预压 3940 导轨型号丝杠轴加工方式球保持器轴的花键部分中空轴滚珠精密无无无轴承支撑座固定侧的推荐方式轴承支撑座支撑侧的推荐方式螺母种类螺纹方向间隔钢球 BK40 BF40 双螺帽右螺纹, 左螺纹（需要确认）, 左右螺纹（需要确认）无轴方向刚性（N/μ...更多信息

THK BNFN 5005-4.5

载荷钢球圈列数 DN值预压预压方法预压负荷（N） 3列 1.50圈 70000 有定位置预压 1010 导轨型号丝杠轴加工方式球保持器轴的花键部分中空轴滚珠精密无无无轴承支撑座固定侧的推荐方式轴承支撑座支撑侧的推荐方式螺母种类螺纹方向间隔钢球 BK40 BF40 双螺帽右螺纹, 左螺纹（需要确认）, 左右螺纹（需要确认）无轴方向刚性（N/μ...更多信息

THK BNFN 5012-3.5

载荷钢球圈列数 DN值预压预压方法预压负荷（N） 1row 3.50圈 70000 有定位置预压 2900 导轨型号丝杠轴加工方式球保持器轴的花键部分中空轴滚珠精密无无无轴承支撑座固定侧的推荐方式轴承支撑座支撑侧的推荐方式螺母种类螺纹方向间隔钢球 BK40 BF40 双螺帽右螺纹, 左螺纹（需要确认）, 左右螺纹（需要确认）无轴方向刚性（N/μ...更多信息

THK BNFN 5016-5

载荷钢球圈列数 DN值预压预压方法预压负荷（N） 2列 2.50圈 70000 有定位置预压 6615 导轨型号丝杠轴加工方式球保持器轴的花键部分中空轴滚珠精密无无无轴承支撑座固定侧的推荐方式轴承支撑座支撑侧的推荐方式螺母种类螺纹方向间隔钢球 BK40 BF40 双螺帽右螺纹, 左螺纹（需要确认）, 左右螺纹（需要确认）无轴方向刚性（N/μ...更多信息

THK BNFN 5510-2.5

载荷钢球圈列数 DN值预压预压方法预压负荷（N） 1row 2.50圈 70000 有定位置预压 1670 导轨型号丝杠轴加工方式球保持器轴的花键部分中空轴滚珠精密无无无轴承支撑座固定侧的推荐方式轴承支撑座支撑侧的推荐方式螺母种类螺纹方向间隔钢球 BK40 BF40 双螺帽右螺纹, 左螺纹（需要确认）, 左右螺纹（需要确认）无轴方向刚性（N/μ...更多信息

THK BNFN 5510-5

载荷钢球圈列数 DN值预压预压方法预压负荷（N） 2列 2.50圈 70000 有定位置预压 3035 导轨型号丝杠轴加工方式球保持器轴的花键部分中空轴滚珠精密无无无轴承支撑座固定侧的推荐方式轴承支撑座支撑侧的推荐方式螺母种类螺纹方向间隔钢球 BK40 BF40 双螺帽右螺纹, 左螺纹（需要确认）, 左右螺纹（需要确认）无轴方向刚性（N/μ...更多信息

THK BNFN 5010-7.5

载荷钢球圈列数 DN值预压预压方法预压负荷（N） 3列 2.50圈 70000 有定位置预压 4125 导轨型号丝杠轴加工方式球保持器轴的花键部分中空轴滚珠精密无无无轴承支撑座固定侧的推荐方式轴承支撑座支撑侧的推荐方式螺母种类螺纹方向间隔钢球 BK40 BF40 双螺帽右螺纹, 左螺纹（需要确认）, 左右螺纹（需要确认）无轴方向刚性（N/μ...更多信息

THK BNFN 5008-2.5

Number of loaded circuits DN Value Preload Method for Providing a Preload Applied preload(N) 1row 2.50 turns 70000 Yes fixed point preload 1080 Type of guide Shaft process method Ball cage Splined portion Hollow shaft Ball Precision None None None Recommended support unit on the Fixed Side type Recommended support unit on the Supported Side type Types of Nuts Threading direction Spacer ball BK40 BF40 Double-nut Right-hand, left-hand(must be check...更多信息

THK BNFN 5510-7.5

Number of loaded circuits DN Value Preload Method for Providing a Preload Applied preload(N) 3 row 2.50 turns 70000 Yes fixed point preload 4295 Type of guide Shaft process method Ball cage Splined portion Hollow shaft Ball Precision None None None Recommended support unit on the Fixed Side type Recommended support unit on the Supported Side type Types of Nuts Threading direction Spacer ball BK40 BF40 Double-nut Right-hand, left-hand(must be chec...更多信息

THK BNFN 5010-3.5

Number of loaded circuits DN Value Preload Method for Providing a Preload Applied preload(N) 1row 3.50 turns 70000 Yes fixed point preload 2140 Type of guide Shaft process method Ball cage Splined portion Hollow shaft Ball Precision None None None Recommended support unit on the Fixed Side type Recommended support unit on the Supported Side type Types of Nuts Threading direction Spacer ball BK40 BF40 Double-nut Right-hand, left-hand(must be check...更多信息

THK BNFN 5005-4.5

Number of loaded circuits DN Value Preload Method for Providing a Preload Applied preload(N) 3 row 1.50 turns 70000 Yes fixed point preload 1010 Type of guide Shaft process method Ball cage Splined portion Hollow shaft Ball Precision None None None Recommended support unit on the Fixed Side type Recommended support unit on the Supported Side type Types of Nuts Threading direction Spacer ball BK40 BF40 Double-nut Right-hand, left-hand(must be chec...更多信息

THK BNFN 5020-2.5

Number of loaded circuits DN Value Preload Method for Providing a Preload Applied preload(N) 1row 2.50 turns 70000 Yes fixed point preload 3625 Type of guide Shaft process method Ball cage Splined portion Hollow shaft Ball Precision None None None Recommended support unit on the Fixed Side type Recommended support unit on the Supported Side type Types of Nuts Threading direction Spacer ball BK40 BF40 Double-nut Right-hand, left-hand(must be check...更多信息

THK BNFN 5008-5

Number of loaded circuits DN Value Preload Method for Providing a Preload Applied preload(N) 2 row 2.50 turns 70000 Yes fixed point preload 1955 Type of guide Shaft process method Ball cage Splined portion Hollow shaft Ball Precision None None None Recommended support unit on the Fixed Side type Recommended support unit on the Supported Side type Types of Nuts Threading direction Spacer ball BK40 BF40 Double-nut Right-hand, left-hand(must be chec...更多信息

THK BNFN 5012-5

Number of loaded circuits DN Value Preload Method for Providing a Preload Applied preload(N) 2 row 2.50 turns 70000 Yes fixed point preload 3940 Type of guide Shaft process method Ball cage Splined portion Hollow shaft Ball Precision None None None Recommended support unit on the Fixed Side type Recommended support unit on the Supported Side type Types of Nuts Threading direction Spacer ball BK40 BF40 Double-nut Right-hand, left-hand(must be chec...更多信息

THK BNFN 5512-2.5

Number of loaded circuits DN Value Preload Method for Providing a Preload Applied preload(N) 1row 2.50 turns 70000 Yes fixed point preload 1965 Type of guide Shaft process method Ball cage Splined portion Hollow shaft Ball Precision None None None Recommended support unit on the Fixed Side type Recommended support unit on the Supported Side type Types of Nuts Threading direction Spacer ball BK40 BF40 Double-nut Right-hand, left-hand(must be check...更多信息

THK BNFN 5016-5

Number of loaded circuits DN Value Preload Method for Providing a Preload Applied preload(N) 2 row 2.50 turns 70000 Yes fixed point preload 6615 Type of guide Shaft process method Ball cage Splined portion Hollow shaft Ball Precision None None None Recommended support unit on the Fixed Side type Recommended support unit on the Supported Side type Types of Nuts Threading direction Spacer ball BK40 BF40 Double-nut Right-hand, left-hand(must be chec...更多信息

THK BNFN 5512-3

Number of loaded circuits DN Value Preload Method for Providing a Preload Applied preload(N) 2 row 1.50 turns 70000 Yes fixed point preload 2300 Type of guide Shaft process method Ball cage Splined portion Hollow shaft Ball Precision None None None Recommended support unit on the Fixed Side type Recommended support unit on the Supported Side type Types of Nuts Threading direction Spacer ball BK40 BF40 Double-nut Right-hand, left-hand(must be chec...更多信息

THK BNFN 5012-2.5

Number of loaded circuits DN Value Preload Method for Providing a Preload Applied preload(N) 1row 2.50 turns 70000 Yes fixed point preload 2170 Type of guide Shaft process method Ball cage Splined portion Hollow shaft Ball Precision None None None Recommended support unit on the Fixed Side type Recommended support unit on the Supported Side type Types of Nuts Threading direction Spacer ball BK40 BF40 Double-nut Right-hand, left-hand(must be check...更多信息

THK BNFN 5520-2.5

Number of loaded circuits DN Value Preload Method for Providing a Preload Applied preload(N) 1row 2.50 turns 70000 Yes fixed point preload 3800 Type of guide Shaft process method Ball cage Splined portion Hollow shaft Ball Precision None None None Recommended support unit on the Fixed Side type Recommended support unit on the Supported Side type Types of Nuts Threading direction Spacer ball BK40 BF40 Double-nut Right-hand, left-hand(must be check...更多信息

THK BNFN 5520-5

Number of loaded circuits DN Value Preload Method for Providing a Preload Applied preload(N) 2 row 2.50 turns 70000 Yes fixed point preload 6910 Type of guide Shaft process method Ball cage Splined portion Hollow shaft Ball Precision None None None Recommended support unit on the Fixed Side type Recommended support unit on the Supported Side type Types of Nuts Threading direction Spacer ball BK40 BF40 Double-nut Right-hand, left-hand(must be chec...更多信息

THK_BNFN_5

THK_BNFN_5

Background to development